ID: my1962
7D, Jalan Anggerik Mokara 31/56, Kota Kemuning, Seksyen 31, 40460 Shah Alam, Selangor Darul Ehsan, Malaysia.
ARI-ARMATUREN SDN. BHD. was established in 1998 is the wholly-owned subsidiary of ARI-ARMARUREN GERMANY, a well-known and reputable German industrial valves manufacturer located in the north western part of Germany.
ARI-ARMATUREN SDN. BHD. was set-up with the objectives of providing sales and marketing, technical supports and after-sales-service for our customers in the ASEAN region.
Our products include, pneumatic and motorized control valves, bellow-sealed globe valves, safety valves, pressure reducing valves, gland-sealed globe valves, balancing valves, rubber and metal seated butterfly valves, wafer check valves, strainers, steam traps and etc.
Other products or services on request are, heat exchanger system, condensate recovery system, flash steam recovery system, steam energy conservation and steam traps survey.
We have a wide spectrum of clienteles from big scale engineering contractors, medium sized piping contractors, small factories to MNC manufacturers in the palm oil refineries, biodiesel producers, oleo-chemical industries, food and beverages, rubber glove manufacturers, silicon-wafer manufacturers, solar-panel manufacturers and many more.
ARI-ARMATUREN SDN. BHD. is committed to providing a satisfactory and total control valves solutions for our customers in the ASEAN region.
ARI-Armaturen Malaysia
Approximately eight million people live in the region around Kuala Lumpur. From here, in addition to Malaysia, ARI-Armaturen SDN BHD also supply quality fittings made in Germany to Indonesia, Thailand, Vietnam and the Philippines. Branch manager Ken Wong and his team provide ARI customers with regular training, in addition to a comprehensive warehouse.
The complete variety of products of the one-stop shop philosophy – et al. with a special regulator valve module warehouse and a safety-valve adjustment service – can be called upon here at any time. Services such as maintenance, repair and energy measurements are carried out by the team on site.
What We Do
Just one partner for even more speed. Even more flexibility. Even more economy.
You need to have a partner who is capable of providing prompt and competent advice – no matter whether it’s control valves you’re looking for, for instance, or pressure reducing valves, globe valves, butterfly valves, safety valves, steam traps, actuators or application engineering solutions.
Short lines of communication mean even more flexibility plus significant time savings – an excellent starting point if you want to maximise your profits.
With ARI you profit from a comprehensive valve concept with 20,000 carefully coordinated products in 200,000 variants.
STEVI – your flexible control system for industrial applications!
Reap the benefits of ARI control valve technology with STEVI! Variable product solutions give you more flexibility, more power and more precision. For control – mixing / diverting – isolation even in harsh industrial environments. And don’t forget the PREMIO electric thrust actuator and its high-performance PREMIO-Plus 2G counterpart. Driving power made by ARI!
FABA – the new generation with 100% tight shut-off technology! More than 17,000 variants.
ARI FABA bellows valves. Extra-tight shut-off due to “cut effect”. Extra-tight shut-off due to conical marginal seat geometry. Extra-tight shut-off due to significantly increased seat pressure and longer service life.
Or ZETRIX – the ARI process valve for challenging applications. Triple offset design, metal seal and self-aligning sealing ring.
SAFE – flexible and safe. More than 35,000 variants!
ARI SAFE safety valves integrate advanced design features for optimal performance. Put your trust in certified safety: these valves are type test approved to VdTÜV, ASME and SAFE-Check – our new service for testing installed ARI safety valves (patent-pending test method that works without increasing the boiler pressure or interrupting operation of the plant – absolutely no media loss).
Alternatively, ARI-REYCO is a complete range conforming to API 526. Accurate response, flip-over plug, optimal plug guiding, up to 6000 psi (414 bar)!
CONA – economy through energy savings
Save energy with CONA’s advanced steam trap technology. Ball float, bimetallic, thermodynamic and balanced pressure steam traps or CODI manifolds. Cut costs and energy consumption with the patented CONA-control monitoring system. Thousands of steam traps tested individually in just three seconds!
ARI Actuators – the new generation of variable actuator technology!
Driving power made by ARI! Choose between pneumatic actuators from DP32 to DP35 and our PREMIO or PREMIO-Plus electric actuators. The new PREMIO-Plus 2G is your ticket to the new generation of variable actuator technology. Thanks to the BLDC motor with very high efficiency, extended lifetime, up to sixty percent lower power consumption and variable positioning.
Pressure Reducing Valves: ARI-PREDU
Pressure Regulating Controller: ARI-PREDEX
Pressure Regulating Valve: ARI-PRESO
Temperature Controller:
STEVI – Control valves in more than 100,000 variants! FABA – The bellows sealed valve ZETRIX – The ARI process valve ZEDOX – The High Performance-Valve STOBU – The stop valve alternative EURO-WEDI – With proven plug / seat geometry SAFE / REYCO – More than 35,000 variations – in DIN EN and ASME CONA – Compact discharge ARI-Systems – Systems, Vessels and Modules for Thermal Processes ARI Digital-Services myARI – Your Service and Information Portal ARI-ID Product Information – The digital name plate
ARMATUREN Butterfly Valves – ARI-GESA
Product Description:
Features:
ARI-GESA®:
ARMATUREN Steam Traps – ARI-CONA SC
Product Description:
Features:
CONA® SC / SC Plus Ball Float Steam Trap
CONA® S Ball Float Steam Trap
Document:
Product Leaflets (CONA® SC / SC Plus)
Product Leaflets (CONA® S)
ARMATUREN Globe Valve – ARI-FABA Supra I
Product Description:
Features:
ARI-FABA®-Supra Stop Valve With Bellows Seal
ARI-FABA®-Supra PN63-160 Stop Valve With Bellows Seal
Document:
Product Leaflets (ARI-FABA® – Supra)
Product Leaflets (ARI-FABA® – Supra PN63-160)
ARMATUREN Steam Traps – ARI-CONA M
Product Description:
Features:
Document:
Product Leaflets (CONA® M)
ARMATUREN Check Valves – ARI-CHECKO V
Product Description:
Features:
ARMATUREN Globe Valve – ARI-FABA Supra C
Product Description:
Features:
ARI-FABA®-Supra Stop Valve With Bellows Seal
Document:
Product Leaflets (ARI-FABA® – Supra)
ARMATUREN Globe Valve – ARI-STOBU
Product Description:
Features:
ARI-STOBU® PN16-40 Stuffing Box Valve
ARI-STOBU® PN63-160 Stuffing Box Valve Hand-Operated / Automated
Document:
Product Leaflets (ARI-STOBU® PN16-40)
Product Leaflets (ARI-STOBU® PN63-160)
ARMATUREN Steam Traps – ARI-CONA B
Product Description:
Features:
Document:
Product Leaflets (CONA® B)
ARMATUREN Steam Traps – ARI-CONLIFT
Product Description:
Features:
Document:
Product Leaflets (ARI-CONLIFT®)
ARMATUREN Butterfly Valves – ARI-ZETRIX
Product Description:
Features:
Document:
Product Leaflets (ARI-ZETRIX®)
ARMATUREN Control Valve – ARI-STEVI Vario 448/449
Product Description:
Features:
ARMATUREN Globe Valve – ARI-FABA Plus
Product Description:
Features:
Document:
Product Leaflets (ARI-FABA Plus)
ARMATUREN Safety Valve – ARI-SAFE
Product Description:
Features:
ARI-SAFE
Document:
Product Leaflets (ARI-SAFE)
ARMATUREN Butterfly Valves – ARI-ZESA
Product Description:
Features:
ARI-ZESA: Water type
ARI-GESA: Lug type
ARMATUREN Control Valve – ARI-STEVI Smart 450/451
Product Description:
ARMATUREN Check Valves – ARI-CHECKO D
Product Description:
Features:
ARMATUREN Control Valve – ARI-STEVI Pro 470/471
Product Description:
ARMATUREN Safety Valve – ARI-SAFE-P
Product Description:
Features:
ARI-SAFE
Document:
Product Leaflets (ARI-SAFE)
CONLIFT – The New Mechanical Condensate Pump – Now With A Casted Body
Now also with a casted body and lightweight design for higher differential pressure up to 14 bar and lower motive steam consumption!
Fluids Pumped: Group 2 fluids with a density of 0.85-1.15 kg/dm³
Nominal Diameter: DN 25/25, DN 40/40, DN 50/50, DN 80/50
Materials: Body: Jacket P235GH, sockets and flanges P250GH, plates P265GH, cover P265GH, Stainless steel: Body / bonnet: 1.4571, SG iron: Body / bonnet: EN-JS1049
Connection Types: Flange connections to DIN EN 1092-1, PN 16
Optional: Flanges drilled to ANSI Class 150
Temperature: -10°C to +200°C
Pump Trap CONA P – A Combination Of A Pump And A Steam Trap
Economical and flexible: “Two-in-One” principle unites all the functionality of a traditional float trap and a condensate pump in ONE item – ideal when space is restricted.
Fluid Pumped: Group 2 fluids with a density of 0.85-1.15 kg/dm³
Nominal Diameter: DN 25/25, 40/40, 50/50
Materials: Body EN JS-1049
Connection Types: Standard flanges acc. to DIN EN 1092-1, PN 16-40
SAFE Combi-C / REYCO™ Combi-C / SAFE Combi-R
Changeover valves and rupture discs: 100 % stand-by security – even for critical media!
Advantages of a combination safety valve with a changeover valve:
Advantages of a rupture disc:
CONA S
CONA S, the ball float steam trap, now also as a Power version, with more performance for differential pressures up to 32 bar and >10,000 kg/h capacity!
For major fluctuations in pressure and volume – instant discharge with no temperature loss! For discharge of condensate at boiling temperature.
Design: DN 15-100 / PN 16-160
Size: 1/2“-4“ / ANSI Class 150-900
Materials: Cast iron, SG iron, cast steel, forged steel, heat resistant steel, stainless steel, ASTM materials
Connection Types: Flanges, screwed sockets, socket weld ends, butt weld ends
SAFE
Safety valve variants now available in stainless steel and up to DN 250, incl. stainless steel bellows
SAFE now up to DN 250 also in stainless steel
SAFE now up to DN 250 also with balanced bellow
Diameter:
DN15/25 up to DN250/350
1“x2“ up to 6“x10“
Nominal Pressure:
PN16/16, PN40/16
ANSI150/150, 300/150
Set Pressure: 0,2 bis 40bar
Body Material: EN-JL1040, EN-JS1049, 1.0619+N, SA216 WCB, 1.4408, SA351 CF8M
FABA Supra MD PN 63-160
Bellows seal valves FABA now also for medium pressure (PN 63-160) with nominal diameters DN 10-100
Design: DIN
Materials: Cast steel, forged steel, heat resistant steel
Nominal Diameter: DN 10-100
Nominal Pressure: PN 63-160
Connection Types: Flanges, butt weld ends
STEVI Pro – The High-Performance Control Valve For Professional Control Especially In Critical Applications
STEVI Pro – The high-performance control valve for professional control especially in critical applications
The high-performance control valve, stainless steel variant now also with stainless steel bellows!
Plug Design: Parabolic plug, optional V-port or perforated plug (optional pressure balancing in both cases)
Nominal Diameter: DN 15-250 / NPS 1“-8“
Nominal Pressure: PN 16-40 / ANSI Class 150-300
Actuators: Electric or pneumatic
Body Materials: e.g. EN-JS1049, 1.0619+N, SA216WCB, 1.4581
Flow Media: e.g. hot water, steam, gas, refrigerant, brine, etc.
Sizes: DN 80 – 1200
Nominal Pressure: PN 10 – 40, Class 150, Class 300
Temperature: -60°C up to +427°C
Face-To-Face: DIN EN 558-1 series 13, ISO 5752 series 13, API 609 cat. B short pattern
Body Material: 1.0619+N, 1.4408, SA216 Grade WCB, SA351 Grade CF8M
STEVI Vario – The New, Variable, Compact Control Valve New Product
Plug Design: Parabolic plug / perforated plug
Nominal Diameter: DN 15-100
Nominal Pressure: PN 16-40
Actuators: Electric or pneumatic
Body Materials: e.g. EN-JL1040, EN-JS1049, 1.0619+N, 1.4408
Flow Media: e.g. brine, warm water, hot water
The new “Vario” has a variable actuator design and is incredibly flexible thanks to the changeable, variable trim. It is precise and durable because vibration is prevented even at high differential pressures. The extended service life is a further advantage.
The “Vario” extends the existing STEVI® range consisting of STEVI® Smart (Series 440/441) – the classic standard valve for universal applications – and STEVI® Pro (Series 470/471) – the highperformance control valve for critical applications.
Long Life: stem seals already proven millions of times over, service life now further extended (PTFE V-ring sealing units and EPDM linings)
Optimum Handling: upper part can be rotated 360°
Flexible: changeable, variable trim (at least 4 Kvs values as well as multiple flow characteristics and plug designs)
Precise and Durable: vibration is prevented even at high differential pressures (stable shaft guiding)
Easy Handling: small footprint and reduced weight (low height)
Economical: very low air consumption (smaller pneumatic actuators on request)
Plug design: Parabolic plug / perforated plug
Nominal Diameter: DN 15-100
Nominal Pressure: PN 16-40
Actuators: Electric or pneumatic
Body Materials: e.g. EN-JL1040, EN-JS1049, 1.0619+N, 1.4408
Flow Media: e.g. brine, warm water, hot water, refrigerant, steam, gas, etc.
PREMIO Plus 2G – The new generation of variable actuator technology New Products
CONA All-In-One – Now Also Available In DIN EN 26554 (Face-To-Face Dimensions) New Products
Compact discharge in a multi-valving system! Patented. The integrated system comprises a steam trap, stop valve, strainer, check valve and drain valve! Reduces pipe connections by up to 80% reduction.
Sizes: DN 15, DN 20, DN 25; 1/2“ to 1“
Nominal Pressure: PN 40, ANSI CI300
Materials: Forged or stainless steel
Types of Connection: Now also available in DIN EN 26554 (face-to-face dimensions) Choice of butt weld ends / socket weld ends / screwed sockets (length acc. to company standard or as specified by customer)
CONLIFT – The New, Float Operated Condensate Pump! New Products
Versatile & energy efficient – Pump for condensate collection & return.
For condensate collection and return – flexible under ANY conditions (from vacuum to high temperatures)
Fluids Pumped: Group 2 fluids with a density of 0.85 to 1.15 kg/dm³
Sizes: DN 25/25, DN 40/40, DN 50/50, DN 80/50
Types of Connection: Flange connections to DIN EN 1092-1, PN 16, DIN 2533
Optional: Flanges drilled to ANSI Class 150
Mounting Position: Horizontal flow
Materials: Body: Jacket P235GH, sockets and flanges P250GH, plates P265GH, bonnets P250GH
Temperatur: -10°C bis +200°C
Pump Trap CONA P – A Combination Of A Pump And A Steam Trap New Products
Economical and flexible: “Two-in-One” principle unites all the functionality of a traditional float trap and a condensate pump in ONE item – ideal when space is restricted.
Versatile: applicable for all loads
High Performance: large displacement
Easy Handling: low filling head required
Energy Efficient: self-acting without electricity
Fluid Pumped: Group 2 fluids with a density of 0.85-1.15 kg/dm³
Nominal Diameter: DN 25/25, 40/40, 50/50
Materials: Body EN JS-1049
Connection Types: Standard flanges acc. to DIN EN 1092-1, PN 16-40
SAFE Safety Valves Now With The “SHR” Premium Soft Seal! New Products
Now with zero leakage in combination with the innovative premium soft seal SHR* for steam and hot water up to +220°C
* Steam- / Hot Water-Resistance
The Medium Pressure Range Stop Valve STOBU New Products
For robust isolation in industry, chemicals and shipbuilding
Plug Designs: Throttling plug, screw-down non-return plug with resetting spring, balancing plug, soft sealing plug
Special Design: e.g. limit switch (mechanical or inductive), chain wheel
Versatile Applications: e.g. seawater version acc. to DIN 86251 (seat ring and plug e.g. in CUSN10-CU / stem e.g. in CUSN8)
Nominal Diameter: DN 10-100 (new: DN 65-100)
Materials: Cast steel, forged steel, heat resistant steels
Temperature: -10°C up to +550°C
The Triple Offset Butterfly ZETRIX
Now also with butt weld ends or as a fully lugged, wafer flange version in Class 600 (PN 63/100)
Design: EN 12516, ASME B16.34, API 609
Type of Connection: EN 1092, ASME 16.5, ASME 16.47
Nominal diameter
Double Flange: DN 80-1200, 3” – 48”
Lug Type: DN 80-600, 3” to 24”
Butt-Weld Ends: DN 80-600, 3” to 24”
Nominal Pressure: PN 10 to PN 40, Class 150, Class 300 / 600 Face-to-face
Double Flange: DIN EN 558-1 series 13, ISO 5752, API 609
Lug Type: DIN EN 558-1 series 16, ISO 5752
Butt-Weld Ends: DIN EN 558-1 series 14, ISO 5752
Material: Cast steel (1.0619 +N; SA216 WCB) Stainless steel (1.4408; SA351 CF8M)
Temperature: -60°C up to +427°C
Approvals firesafe, SIL, ATEX, ISO 15848-1, ATEX
ARI-CORsys St Systems
Condensate recovery and return station – Standard version
Application: Industrial installations, processing technology, plant manufacturing, etc
ARI-PREsys S Systems
Pressure reducing station for steam self-acting or with electro-pneumatic control
Application: Industrial installations, processing technology, plant manufacturing, etc.
Medium: Steam, neutral gases, vapours and liquids, etc
PACO Electric Actuators
Electric actuator ARI-PACO 0,85kN
Application: Heating facilities, AIR conditioning facilities
PREMIO Electric Actuators
Electric actuator ARI-PREMIO
Application: Industrial installations, processing technology, plant manufacturing, etc.
PREMIO-Plus 2G Electric Actuators
Electric actuator ARI-PREMIO-Plus 2G
Application: Industrial installations, processing technology, plant manufacturing, etc.
Pneumatic Actuators
Pneumatic actuator DP
Application: Industrial installations, processing technology, plant manufacturing, etc.
ARI-CODI B Manifolds For Condensate Collection And Steam Dist
Prefabricated compact manifolds for condensate collection and steam distribution – with bellow seal and vertical installation
Application: Collects and distributes condensate, steam and fluids
Medium: Steam, condensate, water, oil, etc.
ARI-CODI S Manifolds For Condensate Collection And Steam Dist
Prefabricated compact manifolds for condensate collection and steam distribution – with stuffing box and vertical installation
Application: Collects and distributes condensate, steam and fluids
Medium: Steam, condensate, water, oil, etc.
Double Window Sight Glasses Components & Accessories For Steam Range
Double window sight glasses (Flow indicator)
eClass-No.: 37011301
Application: For monitoring the function of steam traps in pipe work systems
Medium: Steam, condensate, etc.
Liquid Return Temperature Limiter Components & Accessories For Steam Range
Liquid return temperature limiter
eClass-No.: 37019090
Application: Return temperature limitation for a pipe tracing system.
Medium: Steam, condensate, etc.
Condensate Discharge Temperature Limiter Components & Accessories For Steam Range
Condensate discharge temperature limiter
eClass-No.: 37010790
Application: For the discharge of condensate without re-evaporation
Medium: Steam, condensate, etc.
Liquid Drainer Components & Accessories For Steam Range
Liquid drainer
eClass-No.: 37019090
Application: For automatic condensate-discharge during start-up and operation
Medium: Steam, condensate, etc.
ARI-CONA Control Components & Accessories For Steam Range
Monitoring system for steam traps / External test chamber
Application: Individual error reports on every single steam trap in a matter of seconds thanks to the ASI bus wiring (and optional networking with higher-level bus systems)
Medium: Steam, condensate, gases with liquid components, etc.
ARI-CONA Connector Components & Accessories For Steam Range
System connector
eClass-No.: 37010790
Application: Ventilation valve for pipelines, condensing vapour (steam) or liquid systems, where the system pressure should not fall below the atmospheric pressure.
Medium: Steam, condensate, etc.
ARI-CONA All-In-One Steam Traps
Bimetallic steam trap
eClass-No.: 37010708
Application: For discharge of condensate with limited sub-cooling
Medium: Steam, condensate, etc.
ARI-CONA TD Steam Traps
Thermodynamic steam trap
eClass-No.: 37010790
Application: For discharge of condensate with limited sub-cooling
Medium: Steam, condensate, etc.
ARI-CONLIFT Steam Traps
Float-operated condensate pump
Application: For discharge of condensate with limited sub-cooling
Medium: Steam, condensate, etc.
ARI-CONA S Steam Traps
Ball float steam trap
eClass-No.: 37010706
Application: For discharge of condensate at boiling temperature
Medium: Steam, condensate, gases with liquid components, etc.
ARI-CONA P Steam Traps
Float-operated pump trap
Application: Ventilation valve for pipelines, condensing vapour (steam) or liquid systems, where the system pressure should not fall below the atmospheric pressure.
Medium: Steam, condensate, etc.
ARI-CONA SC Steam Traps
Ball float steam trap
eClass-No.: 37010706
Application: For discharge of condensate at boiling temperature
Medium: Steam, condensate, gases with liquid components, etc.
ARI-CONA SC-Plus Steam Traps
Ball float steam trap
eClass-No.: 37010706
Application: For discharge of condensate at boiling temperature
Medium: Steam, condensate, gases with liquid components, etc.
ARI-CONA B Steam Traps
Bimetallic steam trap
eClass-No.: 37010708
Application: For the discharge of condensate sub-cooled between 10 and 30 K
Medium: Steam, condensate, etc.
ARI-CONA M Steam Traps
Thermostatic steam trap
eClass-No.: 37010707/37011801
Application: For the discharge of condensate sub-cooled up to 40 K
Medium: Steam, condensate, etc.
ARI-REYCO R SERIES Safety Valve
ANSI-Full Nozzle-Safety Relief Valve with flanges – closed bonnet -closed lifting device – acc. to API 526
eClass-No.: 37010905
Application: Industrial installations, processing technology, plant manufacturing, etc.
Medium: Steam, neutral gases, vapours and liquids.
ARI-REYCO RL SERIES Safety Valve
ANSI-Full Nozzle-Safety Relief Valve – closed bonnet – closed lifting device
eClass-No.: 37010905
Application: Industrial installations, processing technology, plant manufacturing, etc.
Medium: Steam, neutral gases, vapours and liquids.
ARI-SAFE-TCS Safety Valve
Standard safety valve with thread connection – closed bonnet – closed lifting device – for horizontal application – acc. to VdTÜV sheet 100, AD2000-A2 and EN ISO 4126-1
eClass-No.: 37010905
Application: Chemical Industry, processing industry, plant manufacturing
Medium: Steam, aggressive gases, vapours and liquids.
ARI-SAFE-SN ANSI Safety Valve
ANSI-Full lift/Standard safety valve with flanges – closed lifting device – ASME
eClass-No.: 37010905
Application: Industrial installations, processing technology, plant manufacturing, etc.
Medium: Steam, neutral gases, vapours and liquids.
ARI-SAFE-TCP Safety Valve
Standard safety valve with thread connection – closed bonnet – closed lifting device – acc. to VdTÜV sheet 100, AD2000-A2 and EN ISO 4126-1
eClass-No.: 37010905
Application: Chemical Industry, processing industry, plant manufacturing
Medium: Steam, aggressive gases, vapours and liquids.
ARI-SAFE-TC Safety Valve
Full lift/Standard safety valve with thread connection – closed bonnet – closed lifting device – acc. to VdTÜV sheet 100, AD2000-A2 and EN ISO 4126-1
eClass-No.: 37010905
Application: Industrial installations, processing technology, plant manufacturing, etc.
Medium: Steam, aggressive gases, vapours and liquids.
ARI-SAFE Safety Valves
Full lift/Standard safety valve with flanges – closed bonnet – closed lifting device – acc. to VdTÜV sheet 100, AD2000-A2 and EN ISO 4126-1
eClass-No.: 37010905
Application: Chemical Industry, processing industry, plant manufacturing
Medium: Steam, aggressive gases, vapours and liquids.
ARI-SAFE-P Safety Valve
Standard safety valve with flanges – closed bonnet – closed lifting device – acc. to VdTÜV sheet 100, AD2000-A2 and EN ISO 4126-1
eClass-No.: 37010905
Application: Chemical Industry, processing industry, plant manufacturing
Medium: Steam, aggressive gases, vapours and liquids.
ARI-CHECKO D Check Valve
Wafer-typ flange-Check valve
eClass-No.: 37010801
Application: Recycling facilities, chemical industry, hospital technology, process water installations, installations with aggressive media
Medium: Process water, aggressive media, etc.
ARI-Strainer Strainer
Strainer
eClass-No.: 37011401
Application: Recycling facilities, chemical industry, hospital technology, process water installations, installations with aggressive media
Medium: Steam, gases, liquids, etc.
ARI-ZETRIX Butterfly Valve
Threaded flange process valve with metallic sealing – Triple offset
eClass-No.: 37010301
Application: Oil and gas processing, refineries, petrochemicals, chemicals, power plants, district heating, solar thermal power stations, pulp and paper, steelworks, sugar processing, industrial and plant manufacturing, Shipbuilding, specific applications in HVAC
Medium: Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, alkalis, acids, de-ionised water, pure steam, etc.
ARI-CHECKO V Check Valve
Check valve
eClass-No.: 37010801
Application: Recycling facilities, chemical industry, hospital technology, process water installations, installations with aggressive media
Medium: Process water, aggressive media, etc.
ARI-ZIVA G Butterfly Valve
Butterfly valve with threaded eyelets and notch lever – industrial range
eClass-No.: 37010301
Application: Cold -and cooling water installations, Heating installations, Drinking water and domestic water, Waste water, Swimming pool-installations, Power stations, Gas installations, Shipbuilding, etc.
Medium: Cold water, warm water, hot water, drinking water, process water, etc.
ARI-ZETRIX Butterfly Valve
Double flanged process valve with metallic sealing – triple offset
eClass-No.: 37010301
Application: Oil and gas processing, refineries, petrochemicals, chemicals, power plants, district heating, solar thermal power stations, pulp and paper, steelworks, sugar processing, industrial and plant manufacturing, Shipbuilding, specific applications in HVAC
Medium: Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, alkalis, acids, de-ionised water, pure steam, etc.
ARI-GESA Butterfly Valve
Butterfly valve with threaded eyelets and notch lever
eClass-No.: 37010301
Application: Heating facilities
Medium: Cold water, warm water, hot water, drinking water, process water, etc.
ARI-ZIVA Z Butterfly Valve
Butterfly valve with elongated eyelets and notch lever – industrial range
eClass-No.: 37010301
Application: Cold -and cooling water installations, Heating installations, Drinking water and domestic water, Waste water, Swimming pool-installations, Power stations, Gas installations, Shipbuilding, etc.
Medium: Cold water, warm water, hot water, drinking water, process water, etc.
ARI-ZESA Butterfly Valve
Butterfly valve with elongated eyelets and notch lever
eClass-No.: 37010301
Application: Heating facilities
Medium: Cold water, warm water, hot water, drinking water, process water, etc.
ARI-ASTRA DC Flow Regulating Valves
Druckunabhängiges Abgleich- und Regelventil in Durchgangsform
eClass-No.: 37010203
Application: Heating facilities, AIR conditioning facilities
Medium: Water, water with cold-protection, etc.
ARI-ASTRA Plus Flow Regulating Valves
Combined flow regulating valve – straight through with flanges
eClass-No.: 37010203
Application: Heating facilities, AIR conditioning facilities
Medium: Water, water with cold-protection, etc.
ARI-ASTRA D Flow Regulating Valves
Automatischer Volumenstrombegrenzer als Zwischenflansch-Armatur
eClass-No.: 37010290
Application: Heating facilities, AIR conditioning facilities
Medium: Water, water with cold-protection, etc.
ARI-ASTRA Flow Regulating Valves
Combined flow regulating valve – straight through with flanges and special spindle seal
eClass-No.: 37010203
Application: Heating facilities, AIR conditioning facilities
Medium: Water, water with cold-protection, etc.
ARI-EURO-WEDI Globe Valve
Stop valve – straight through with soft seal – Face-to-face length FTF
eClass-No.: 37010201
Application: Heating facilities, AIR conditioning facilities
Medium: Water, water with cold-protection, etc.
ARI-FABA LA Globe Valve
Stop valve – straight through with long bellow and bellows seal
eClass-No.: 37010201
Application: Industry, powerstations, flue gas purification plant, processing technology, gas supply, vapour facilities, recycling facilities, vacuum facilities, hot water, heating technology, district heating, thermal oil applications, general plant manufacturing, etc.
Medium: Steam, gases, hot water, thermal oil, process water, vacuum facilities, ammonia etc.
ARI-STOBU Globe Valve
Stop valve with gland seal
eClass-No.: 37010201
Application: Industrial installations, hospitals, food and beverages, processing technology, vapour facilities, plant manufacturing
Medium: Process water, aggressive media, etc.
ARI-FABA Supra I Globe Valve
Stop valve with bellows seal – Industrial version
eClass-No.: 37010201
Application: Industry, powerstations, flue gas purification plant, processing technology, gas supply, vapour facilities, recycling facilities, vacuum facilities, hot water, thermal oil applications, general plant manufacturing, etc.
Medium: Aggressive media, etc
ARI-FABA Supra C Globe Valve
Stop valve with bellows seal – Chemical version
eClass-No.: 37010201
Application: Recycling facilities, chemical industry, process pipes, process water installations, installations with aggressive media
Medium: Steam, gases, hot water, thermal oil, ammonia etc.
ARI-FABA Plus Globe Valve
Stop valve with bellows seal
eClass-No.: 37010201
Application: Recycling facilities, chemical industry, hospital technology, process water installations, installations with aggressive media
Medium: Process water, aggressive media, etc.
ARI-FABA Plus ANSI Globe Valve
ANSI-Stop valve – straight through with bellows seal
eClass-No.: 37010201
Application: Industry, powerstations, flue gas purification plant, processing technology, gas supply, vapour facilities, recycling facilities, vacuum facilities, hot water, heating technology, district heating, thermal oil applications, general plant manufacturing, etc.
Medium: Steam, gases, hot water, thermal oil, process water, vacuum facilities, ammonia etc.
ARI-TEMPTROL 773 LCG Temperature Controller
Thermal-mixing/diverting valve – 3way – without cooling spacer (max. 130°C) – without balancing bellow
eClass-No.: 37012290
Application: Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.
Medium: Fluids, air and steam
ARI-TEMPTROL 773/774 Temperature Controller
Thermal-mixing/diverting valve – 3way with flanges without cooling spacer (max. 150°C)
eClass-No.: 37012290
Application: Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.
Medium: Fluids, air and steam
ARI-TEMPTROL 775 Temperature Controller
Thermal-opening valve – straight through with flanges without cooling spacer (max. 150°C)
eClass-No.: 37012290
Application: Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.
Medium: Fluids, air and steam
ARI-TEMPTROL 775 LCG Temperature Controller
Thermal-opening valve – straight through without cooling spacer (max. 130°C) – without balancing bellow
eClass-No.: 37012290
Application: Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.
Medium: Fluids, air and steam
ARI-STEVI BBD 415 Control Valves
Blow down valve – straight through with flanges and pneumatic actuator
Class-No.: 37010201
Application:
Selection Criteria: boiler blow down
Application: Steam boiler engineering
Medium: Cooling water, cooling brine, warm water, hot water, steam, gas, etc
ARI-TEMPTROL 771 LCG Temperature Controller
Thermal-closing valve – straight through – without cooling spacer (max. 130°C) – without balancing bellow
eClass-No.: 37012290
Application: Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.
Medium: Fluids, air and steam
ARI-STEVI Pro 453 Control Valves
Feedwater control valve – 3-way with flanges – with pump spill backe
Class-No.: 37010203
Application:
Selection Criteria: simple control task, non-critical operating conditions, standard requirements
Application: industrial complex, building technology, mechanical engineering
Medium: Cooling water, cooling brine, warm water, hot water, steam, gas, etc.
ARI-STEVI 405/460 Control Valves
Stop valve – straight through with flangese
Class-No.: 37010201
Application:
Selection Criteria: open/close task, non-critical operating conditions, standard requirements
Application: industrial complex, building technology, mechanical engineering
Medium: Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, etc.
ARI-STEVI Smart 450/451 Control Valves
Control valve – 3-way with flangese
Class-No.: 37010213
Application:
Selection Criteria: simple control task, non-critical operating conditions, standard requirements
Application: industrial complex, building technology, mechanical engineering
Medium: Cooling water, cooling brine, warm water, hot water, steam, gas, etc
ARI-STEVI Smart 423/463 Control Valves
Control valve – 3-way with flangese
Class-No.: 37010213
Application:
Selection Criteria: simple control task, non-critical operating conditions, standard requirements
Application: industrial complex, building technology, mechanical engineering
Medium: Cooling water, cooling brine, warm water, hot water, steam, gas, etc.
ARI-STEVI Smart 440/441 Control Valves
Control valve – straight through with flangese
Class-No.: 37010203
Application:
Selection Criteria: simple control task, non-critical operating conditions, standard requirements
Application: industrial complex, building technology, mechanical engineering
Medium: Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, alkalis, acids, de-ionised water, pure steam, etc.
ARI-STEVI Smart 425/426 Control Valves
Control valve – straight through with shaft guided pluge
Class-No.: 37010203
Application:
Selection Criteria: complex control task, critical operating conditions, specific requirements Application: process technology, (heavy-) industrial complex, plant construction, chemical industry, power plant technology
Medium: Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, etc.
ARI-STEVI Vario 448/449 Control Valves
Control valve – straight through with flanges and screwed seat ringe
Class-No.: 37010203
Application:
Selection Criteria: complex control task, non-critical operating conditions, standard requirements
Application: industrial complex, plant construction, process technology
Medium: Cooling water, cooling brine, warm water, hot water, steam, gas, etc.
ARI-STEVI Pro 422/462 Control Valves
Control valve – straight through with shaft guided pluge
Class-No.: 37010203
Application:
Selection Criteria: complex control task, critical operating conditions, specific requirements Application: process technology, (heavy-) industrial complex, plant construction, chemical industry, power plant technology
Medium: Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, etc.
ARI-TEMPTROL 771/772 Temperature Controller
Thermal-closing valve – straight through with flanges without cooling spacer (max. 150°C)
eClass-No.: 37012290
Application: Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.
Medium: Fluids, air and steam.
ARI-STEVI Pro 470/471 ANSI Control Valves
ANSI-Control valve – straight through with shaft guided pluge
Class-No.: 37010203
Application:
Selection Criteria: complex control task, critical operating conditions, specific requirements Application: process technology, (heavy-) industrial complex, plant construction, chemical industry, power plant technology
Medium: Steam, condensate, gases with liquid components, etc.
ARI-PRESO Pressure Regulating Valve
Pressure regulating valve – straight through with flanges – spring loaded
eClass-No: 37010908
Application: Industrial installations, processing technology, plant manufacturing, etc.
Medium: Liquids, gas and vapours, steam
ARI-PREDEX Pressure Regulating Controller
Excess pressure regulator, straight through with diaphragm actuator
eClass-No.: 37010990
Application: Industrial installations, processing technology, plant manufacturing, etc.
Medium: Steam, neutral gases, vapours and liquids, etc.
ARI-STEVI H 485-488 Control Valves For Heating
Control valve for heating, ventilation and air-conditioninge
Class-No.: 37010213
Application: Heating facilities, AIR conditioning facilities
Medium: Water, water with cold-protection, etc.
ARI-PREDU Pressure Reducing Valves
Pressure reducing valve with diaphragm actuator
Class-No.: 37011101
Application: Industrial installations, processing technology, plant manufacturing, etc.
Medium: Steam, neutral gases, vapours and liquids, etc.
ARI-STEVI Pro 470/471 Control Valves
Control valve – straight through with shaft guided plug
Application:
Selection Criteria: complex control task, critical operating conditions, specific requirements
Application: process technology, (heavy-) industrial complex, plant construction, chemical industry, power plant technology
Medium: Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, etc.
