ID: my1321
225, Jalan Pudu, 55100 Kuala Lumpur, Wilayah Persekutuan, Malaysia.
Efficient and reliable general purpose water transfer in industry, building services and irrigation.
Suitable for water and highly aggressive watery liquids – Domestic water boosters, sprinkling, fire fighting, water treatment plants, seawater pumping, chemical processing, food processing and irrigation.
Designed for automatic pressure boosting in domestic applications, gardens, dairies and stock watering.
Designed for the general purpose transfer of clean, abrasive free water for cooling systems, air conditioning, water purification, metering systems, cleaning, light industrial and agricultural applications.
For all general water supply from 100mm or larger boreholes– Domestic, industrial, stock watering, fire fighting, irrigation pressure boosting.
Designed for raising underground water supplies for domestic, industrial, community, irrigation, stock watering, mining and line shaft turbine applications.
Heavy duty, high efficiency deep well turbine and submersible pumps, designed for submersible applications in bores from 150mm. Available in a wide range of material and drive options.
General water transfer and borehole applications particularly suited to low volume high pressure work.
Designed for high volume water transfer in municipal supply, irrigation, mining, fire fighting, dewatering and industrial applications.
Southern Cross IQ variable frequency drives and EQ pipe mounted variable frequency drives provide intelligent control of any three phase pump motor.
Superior to enclosed impellers for handling fines and stringy material like iron bacteria.
Oil filled, encapsulated and rewindable submersible electric motors for driving submersible pumps. Available in sizes from 4 to 14 inches and ranging from 0.37kW (0.5Hp) to more than 225kW (300Hp).
Ultra tough PUMPING units for coal, sand, sludge, mine slurry, mud and rocks, drill cuttings, almost anything!
The Southern Cross ST/XT/SU heavy heavy duty self-priming solids handling trash pumps feature a durable, easy to maintain design which make them ideal for transferring dirty water.
Reliable slurry pumping and dewatering solutions for heavy duty applications in mining, industry, construction, oil and gas.
Extra-large oil reservoir provides superior lubrication, while insuring more effective cooling and less maintenance. The crankshaft is field-reversible for application flexibility. Easy access to suction and discharge valves means no need to remove pump from system for repair. Factory tested for continuous service with only simple, routine maintenance.
KEY FEATURES
Rugged design for continuous operation. Three suction ports for installation versatility. Smooth solid ceramic cylinder liners allow continuous operation at maximum pressure and flow. Large concentric suction and discharge valves allow complete filling of cylinders. Solid cast iron power end with constant lubrication of all working parts. Fluid end available in high-strength cast iron, aluminum-bronze, or 316 stainless steel.
KEY FEATURES
These pumps offer seven interchangeable plunger and seal packages, allowing complete hydraulic coverage. Optimum flow and pressure is easily converted, even in the field by changing the plunger and seal kit. Cylinder body of high-strength ductile iron or aluminum-bronze for salt-water applications.
KEY FEATURES
Superior equipment technology allows the versatility to machine the pump end from a selection of standard or optional materials. Removable cover section for easy service and is available with hydraulic drive adaption.
KEY FEATURES
Heavy-duty piston pump with high-strength fluid end and spring-loaded flat valves for economical high-pressure pumping of large volumes of fluid. Crankshaft can be rotated in either direction making installation easier.
KEY FEATURES
Slow operating speed reduces wear and prolongs pump life. The fluid end is available in ductile iron or aluminum bronze with flat valves, making routine maintenance easy without removing the pump from the system. All the valve and piston assemblies are serviceable through convenient front and top openings.
KEY FEATURES
Myers largest high volume/pressure series offers interchangeable plungers, seals, and fluid ends to provide various flow/pressure ratings. Also available in hydraulic drive configuration
KEY FEATURES
Gearcase of rugged cast iron protects the gears and serves as an oil reservoir for continuous splash lubrication. Pinion and gear are helical cut and machined from high-strength alloy steel and can rotate in either direction. Valves are abrasion resistant for dependable service in the harshest environments.
KEY FEATURES
The HPL Series brings you the latest in sewer jet pump technology from your time-tested partner, Myers. The HPL keeps your truck running with industry-leading serviceability, a breakthrough in jetting. New cartridge valves, an open cradle for packing and plunger maintenance, and an external lube filter minimize maintenance time, keeping your equipment on the job making you money.
KEY FEATURES
The Myers® V2 Series is the newly innovative 2 hp submersible grinder pump designed specifically for use in today’s complex wastewater environment. It features an advanced cutting technology and semi-open impeller design to effectively macerate typical domestic sewage solids into a fine slurry.
KEY FEATURES
Cable entry system
– Provides double seal protection. Cable jacket sealed by compression fitting. Individual wires sealed by compression grommet. Power cord can be replaced without disturbing motor. Optional quick disconnect available
Grinder assembly
– Rotating cutter and stationary cutter are replaceable without dismantling pump. Constructed of 440 SST hardened to 57-60 Rockwell
CT Series centrifugal pumps are designed to meet your toughest pumping requirements. Rugged cast iron construction can be coupled with either a corrosion resistant composite, or a lead-free brass impeller. Versatile design features allow the CT pumps to be installed with either a vertical or horizontal discharge. The CT Series is ideal for irrigation, air conditioning, cooling tower and booster applications.
KEY FEATURES
– Continuous Duty Rated
– Single Phase (115/230 Volt)
– Three Phase (208/230/460 Volt)
– Composite Impeller Rated to 140°F
– Brass Impeller Rated to 212°F
Centri-Thrift centrifugal pumps are designed for continuous service under demanding conditions. Centi-Thrift pumps have earned a reputation for reliability in booster service, air conditioning, cooling tower, refrigeration, water circulation, liquid transfer, sprinkling, laundry, irrigation, building service, spraying and general industrial applications.
KEY FEATURES
Quick Prime self-priming pumps are designed to supply large quantities of water for long periods. QP’s are ideal for lawn sprinkler systems, car washes and other high volume cleaning and maintenance applications.
KEY FEATURES
High performance 2C two-stage centrifugal pumps are designed to provide years of trouble-free service. The pump end quickly mounts to a NEMA 56C motor. Myers stream-flo design and dynamically balanced impellers produce quiet, vibration-free performance at all pressures. 2C pumps will prime up to 15 feet of total suction lift.
KEY FEATURES
I2C and I2CI two-stage centrifugal pumps are designed for high performance, continuous duty and long life. I2C Series pumps have been installed in booster, irrigation, water circulation, fluid transfer, boiler feed, car wash, water reclamation, water supply, golf course sprinkling and other general industrial, commercial and agricultural applications requiring the pumping of clear or non-corrosive liquids.
KEY FEATURES
The Myers WG20/WGX20 Series are rugged 2 horsepower submersible centrifugal grinder pumps designed for residential, light commercial or industrial applications. It is especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The WG20 Series features a patented cutter mechanism and recessed impeller design to efficiently grind typical domestic sewage solids into a fine slurry.
KEY FEATURES
The Myers WG50/WG50X are rugged 5 horsepower submersible centrifugal grinder pumps designed for residential, light commercial, industrial or municipal applications. They are especially designed for grinder pump applications requiring higher flows at low to moderate heads. The WG50 features a heavy-duty cutter mechanism and recessed impeller design to efficiently grind typical sewage into a fine slurry.
KEY FEATURES
– domestic raw sewage
– 3450 RPM: 3–5 HP, 1 ph, 230 volt 3 ph, 200/230/460 volt 60 Hz
The Myers high head 15 HP submersible centrifugal grinder pumps are designed for municipal, commercial or industrial applications. These pumps are especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The pumps feature a heavy-duty cutter mechanism and recessed impeller designed to efficiently grind typical sewage solids into a fine slurry.
KEY FEATURES
The heavy-duty Myers 3MW series sewage pumps are designed for use in residential raw sewage and light commercial applications. 3MW pumps are available in single and double seal configuration. The enclosed two-vane impeller provides high efficiency pumping and easily handles trashy solids normally found in sewage applications. This series is offered with vertical discharge and easily adapts to a quick-disconnect slide rail system.
KEY FEATURES
Myers 3V and 3VX (explosion-proof) submersible wastewater pumps pass a full 2 1/2″ spherical solid and are the ideal choice whe selecting a pump for your next application. Myers rounded port 2-vane enclosed impeller prevents solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 3V series modified constant veloctiy volute case provides smooth operation over an extended portion of the performance curve for extended seal and bearing life. For use in municipal lift stations, treatment plants, and industrial waste applications.
KEY FEATURES
The 3WHV and V3WHV series solids handling pumps are designed primarily for commercial applications such as schools and churches, industrial plants, shopping centers, apartments and condominiums, marinas, interstate rest stops, sewage collection systems, and much more. This pump can be installed on legs (vertical discharge) or with a quick-disconnect slide rail system. Its ability to handle 2½-inch spherical solids makes it ideal for most light to medium commercial installations.
KEY FEATURES
The 4RC and 4RCX (hazardous location) submersible wastewater pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected. The 4RC/4RCX series provides smooth, vibration-free operation when operating at heads higher than peak efficiency. The pump is for use in municipal lift stations, treatment plants and industrial waste water applications.
KEY FEATURES
– 1150 RPM: 3–15 HP, 200/230/460/575V, 3 phase, 60 Hz
– 1750 RPM: 10–40 HP, 200/230/460/575V, 3 phase, 60 Hz 3450 rpm 20–60 HP, 230/460/575 volts, 3 phase, 60 Hz
The Myers 4VL submersible non-clog sewage pumps are designed especially for high flow applications such as: municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenance. The 4VL’s ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.
KEY FEATURES
The Myers 12VL submersible non-clog sewage pumps are designed especially for high flow, medium head applications such as: Large municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenenance. The 12VL’s high pumping efficiencies, ability to handle solids up to 5 1/4 inches in diameter and 2 available motor speeds make it ideal for most high flow watewater applications.
KEY FEATURES
The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4″ non-clog series capable of passing a full 3 3/16″ spherical solid. Myers rounded port, 2 vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VCDP series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for long seal and bearing life. For use in munipical and industrial waste applications.
KEY FEATURES
The Myers 4VLDP submersible dry pit non-clog sewage pumps are designed especially for high flow applications such as: municipal stations, treament plants, transfer stations and dewatering. The ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.
KEY FEATURES
The 6VCPD submersible dry pit wastewater pumps are a heavy-duty 6″ non-clog series capable of passing a full 3 3/16″ spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 6VCDP series modified constant veolcity volute case provides smooth operation over an extended portion of the performance curve for long seal and bearing life. For use in municipal and industial waste applications.
KEY FEATURES
Designed specifically for use in agricultural lagoon and sewage pit applications. The AG Series is the right choice to handle string trash, fibrous wastes, slurries and other difficult to pump solids without plugging the impeller. The AG pumps have been field proven to provide reliable operation and dependable performance.
KEY FEATURES
The Myers 3WHR Vortex pumps provide low maintenance and low cost. All Myers Vortex pump models have multi-vane, recessed impeller design which pass 3” solids per the “10 State Standards” while keeping the impeller out of direct contact with the pumping medium.
KEY FEATURES
The 4WHR series solids handling pumps are designed primarily for commercial applications such as schools and churches, industrial plants, shopping centers, apartments and condominiums, marinas, interstate rest stops, sewage collection systems, campgrounds, motels, restaurants, office and commercial buildings, state and federal parks, hospitals and nursing homes, dewatering, trailer parks and treatment plants. This pump can be installed with a quick-disconnect slide rail system. Its ability to handle 3-inch spherical solids makes it ideal for most light to medium commercial installations.
KEY FEATURES
Myers self-primers are available with V-belt drive in order to save space and money. When space is expensive or just not available, the V-belt configuration allows the motor to be mounted above the pump or to the side of the pump.The Myers direct drive option with flexible coupling reduces shaft stress so you get longer pump life. It is easy to maintain and keeps running for years.External adjustment allows you to easily maintain original operating efficiency and peak performance. By simply turning the external cap screws you easily adjust the clearance between the impeller and wear plate.You can make the external adjustment without disturbing the piping system. You don’t have to disassemble the pump and piping.
The MSP4/MSPD4 has an external adjustment which saves downtime and doubles the life of the impeller/wear plate. It also has a removable rotating assembly and serviceable flap valve without draining the pump.
Myers self-primers are available with V-belt drive in order to save space and money. When space is expensive or justnot available, the V-belt configuration allows the motor to be mounted above the pump or to the side of the pump.
The Myers direct drive option with flexible coupling reduces shaft stress so you get longer pump life. It is easy to maintain and keeps running for years.
External adjustment allows you to easily maintain original operating efficiency and peak performance. By simply turning the external cap screws you easily adjust the clearance between the impeller and wear plate.
You can make the external adjustment without disturbing the piping system. You don’t have to disassemble the pump and piping.
Satisfying Pumping Needs at the Lowest Cost Over the Life of the System
Myers optimizes system efficiencies with complete engineering services, providing cost-effective solutions and immediate cost savings when planning a pump station. Myers collection system design service provides a comprehensive analysis and design of the complete network, ensuring the system operates at peak efficiencies under various running conditions. Myers software programs provide the engineering tools to properly design the ideal station, including the number of pumps, type of control and lift system.
Myers Quality Engineered Designes Provides Economic and Environmental Value Over the Life of the System
Engineered to Maximize Pump System Operating EfficienciesMyers specializes in complete engineered packaged pump and control systems. All control panels are custom engineered to the customer’s specifications using the highest quality components. Whether you need a simple float controlled lift station or multiple pump control with variable frequency drives, count on Myers to provide excpetional value at a competitive price.
KEY FEATURES
Services
Types of Control Systems
Our engineered system includes the pump filter vault, the high-head effluent submersible pump, and float controls. We will design a system to fit your needs and the special requirements of your project.
KEY FEATURES
The Float Plus is an innovative approach to today’s pump control system requirements with standard features unmatched by most competitors. Through the use of a standard subdoor and raised back panel, the Float Plus Series offers a revolutionary design for housing common control panel features such as circuit breakers, start components, contactors and a terminal strip. While others ask you for more dollars to cover options, the Float Plus Series provides many of the most requested items as standard equipment. Some of these standard features includes lockable latches, a flashing red alarm light with an electronic horn, the innovative touch to silence pad, and a control circuit board, all in a NEMA 4X enclosure. In addition to unsurpassed standard features, Float Plus offers an exclusive control circuit board. Conveniently located on the subdoor, the float indication lights allow the user to see the status of each float and flashes should a float fail.
Flexible piping system with slip-fit discharge connection provides ease of installation and removal for all 2 HP grinders. Pumps include a stainless steel stand.
Flexible piping system with slip-fit discharge connection for all 2 HP grinders provides ease of installation and removal. Pumps include a stainless steel stand. Available with Polyethylene or Fiberglass basin.
Package includes your choice of 2HP submersible grinder pump, union disconnect discharge piping system, control panel, wide angle control float, narrow angle high level alarm float and fiberglass basin available at various depths.
Factory assembled discharge piping with single union ball valve disconnect eliminates installation errors and reduces installation time dramatically. Available with Fiberglass or Polyethylene basin.
Package includes your choice of a 2 HP submersible grinder pump, SRA rail system, control panel, three floats and a polyethylene basin available at various depths.
Liftout rail system provides ease of installation and removal for the centrifugal grinder pumps. The SRA System uses a cast iron discharge elbow with integrated ball check valve. Also available with spark-proof rails for hazardous locations. Available with Polyethylene or Fiberglass basin.
Closed Now!08:00 AM - 05:30 PM
